Hydraulic Pump for Log Splitters, 16 GPM, 2 Stage, 3000 PSI
16 GPM Log Splitter Pump. This brand new 16 GPM, 2-stage hydraulic log splitter gear pump is a must have for any wood splitter application. A gear pump allows for high flow at low pressures, to increase cycle time speed, and high pressure when enough back pressure resistance occurs, like when splitting a log. This pump is not designed for use with universal or "tractor" transmission oil, such as "303". We recommend using an Lovejoy-style jaw coupling i.
L095, which is the most common Lovejoy family used on log splitters and mounting bracket to connect the pump to an engine. Couplings and mounting brackets are available.
Shaft Diameter: 1/2 (0.5 inch) shaft. Keyway: 1/8 (0.125 inch). Outlet: 1/2 NPT (DO NOT use an SAE Straight Thread O-Ring or O-Ring Boss [ORB] fitting). Dimensions: 9" x 6.5" x 4. Minimum engine size: 8 hp.Spacing: 4 Bolt Holes Spaced 2 on Center. Recommended Hydraulic Fluid Type: AW-32 10-Weight (ISO 32), AW-46 20-Weight (ISO 46), Dexron III ATF (automatic transmission fluid). Suction-side filtration should be no finer than 150 micron.
Use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure. Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump. The item "Hydraulic Pump for Log Splitters, 16 GPM, 2 Stage, 3000 PSI" is in sale since Friday, November 8, 2019. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Outdoor Power Equipment\Log Splitters". The seller is "ruggedmade" and is located in Rockland, Massachusetts.This item can be shipped to United States.
- Brand: RuggedMade
- Model: CBNA-13/4.2
- Modified Item: No
- MPN: 32-129-PUMP-16
- Style: 2-Stage
- Custom Bundle: No
- Outlet Port Diameter: 1/2"
- Power Source: Hydraulic
- Rated Pressure: 3,000 PSI
- Inlet Port Diameter: 1"
- Type: Hydraulic
- Max.
Splitting Force: 35 Ton