Hydraulic Pump for Log Splitters, 11 GPM, 2 Stage, 3000 PSI
11 GPM 2 Stage Log Splitter Pump. This replacement pump fits a wide variety of log splitters and outdoor power equipment. Pump works in both horizontal and vertical orientations.
The included inlet nipple requires a 1 inner diameter suction hose. The outlet port is 1/2 NPT (F). The 1/2 shaft is keyed. We recommend using an Lovejoy-style jaw coupling and mounting bracket to connect the pump to an engine. Couplings and mounting brackets are available. We recommend using at least a 5hp 163cc engine to maintain 3,600 rpm under load. Use AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) light hydraulic fluid or Dexron III automatic transmission fluid. This pump is not designed for use with universal or "tractor" transmission oil, such as "303". Suction-side filtration should be no finer than 150 micron. Use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure. Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump. Keyway: 1/8 (0.125 inch). Dimensions: 5.5" x 3" x 4.Mounting Flange: 4 Bolt Holes, 2 on Center. Bolt Circle (inch): 2.85.
The item "Hydraulic Pump for Log Splitters, 11 GPM, 2 Stage, 3000 PSI" is in sale since Friday, November 8, 2019. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Hydraulic Pumps". The seller is "ruggedmade" and is located in Rockland, Massachusetts.
This item can be shipped to United States.
- Rated Pressure: 3000 psi (210 bar)
- Inlet Port Diameter: 1 in
- Hydraulic Pump Type: Hydraulic Gear Pump
- Brand: RuggedMade
- Rated Power: 11 GPM
- MPN: 32-129-PUMP-11
- Outlet Port Diameter: 1/2 in
- Type: Hydraulic