Air Foot Pedal Hydraulic Pump For Auto Body Frame Machines And Shop Presses
Product Description Product Introduction: Our piston can be opened to access and change the seal inside. Plastic pistons are factory sealed and can only be replaced. We now use TEFLON SEALS on the piston they last longer perform better and withstand the heat very well. Aluminum Piston Sleeve: So many of these pumps are using steel metal piston sleeves & as you know compressed air carries water in it. The water in the air will corrode this sleeve, tear the seals, and seize the piston. This sleeve corrosion renders the pump dead as the cost to replace (If it is even available as a part) is very high.
Our pump has an aluminum sleeve with a proprietary anti corrosion coating. Although excessive water will ruin any pump our sleeve will last a very long time. Metal air vent: As the pump pushes oil out it must inhale air into the reservoir. These plastic plugs are constantly clogged, cross threaded, missing and ruin the performance of the pump. We supply a metal AIR VENT with a steel valve burled head.
Simple stupid; using the pump turn burled head out (loosen counter clockwise), transporting pump, turn brass burled ead down tight (Right clockwise). Cast aluminum reservoir: There are many brands that still use plastic reservoirs and housings for these style pumps.
Well; we all know this is a foot pump so it used / placed on the floor. So it is dragged and dropped constantly. I lost count of how many reservoirs I changed and / or melted and repaired cracks on over the years. I also found tons of shops with their pumps in pails with Oil dry collecting the leaking oil and some idiots running a bone dry pump and ruining them.We supply a cast aluminum reservoir that takes a beating! This is a solid base.
It resists corrosion and will not crack or split. Feature 10,000 PSI air/hydraulic foot pump requires 60-120 PSI air pressure Designed to be used with single acting cylinders Provides hands free operation for pumping and releasing load Usable fluid capacity 98 cubic inches Flow rate 42 cu. With no load, 8.5 cu. 1 X Hydraulic pump 700bar Air foot pump with hose 1 X Spray Gun.The item "AIR FOOT PEDAL HYDRAULIC PUMP FOR AUTO BODY FRAME MACHINES AND SHOP PRESSES" is in sale since Sunday, November 3, 2019. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines".
The seller is "ar-tool" and is located in Hebron, Kentucky. This item can be shipped to United States.