13 GPM Hydraulic Log Splitter Pump 2 Stage HI/LO Gear Pump For Presses 3000 PSI
Specifications: New Hydraulic Log Splitter Pump 13 GPM Shaft: ½ Inlet port: 150mm Outlet port: 230mm Minimum 8 HP or larger gas engine. For use with open center hydraulic systems only Maximum pressure: 3000 PSI Bolt circle: 2.83in.
4 holes spaced 2 on center Mounting hole diameter: 344in Woodruff key: 1/8in Rotation is clockwise This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. The HI/LO section of the pump is all aluminum and the end plates are cast steel.
Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. 13 GPM Hydraulic Log Splitter Pump 2 Stage HI/LO Gear Pump For Presses 3000 PSI. The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Suggested applications: Presses, Log Splitters, Clamping Units and Compacto. New Hydraulic Log Splitter Pump 13 GPM.Minimum 8 HP or larger gas engine. For use with open center hydraulic systems only. 4 holes spaced 2 on center. This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Displacement (ml/r): 10.9/3.6 Large pump rated pressure (MPa): 2.5 Small pump rated pressure (MPa): 20 Rated speed (r/min): 3600.
1 PC 13 GPM Hydraulic Log Splitter Pump. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Other Hydraulics & Pneumatics". The seller is "fast-ship-item" and is located in this country: US.
This item can be shipped to United States.- Model: 10.9/3.6
- Brand: Unbranded
- Shaft: ½\
- Inlet port: 150mm
- Outlet port: 230mm
- Bolt circle: 2.83in
- Type: PUMP
- Woodruff key: 1/8in
- Mounting hole diameter: 344in
- Maximum pressure: 3000 PSI
- Custom Bundle: No
- Rotation: clockwise
- Item: Pumps
- Modified Item: No
- Item location: CA /NJ /Austell
- shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii