19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm

19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm
19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm
19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm
19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm

19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm
Brand new 19GPM, 2 stage hydraulic replacement pump for log splitters. It is brand new and has never been opened or used. The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. Suggested applications: Presses, Log Splitters, Clamping Units and Compactors.

Model # CBNA-16.5/3.6. 3 -3/8 across mounting surface. Minimum 9 HP or larger gas engine, direct drive only, horizontal shaft (can be mounted vertical or horizontal). For use with open center hydraulic systems only. 4 holes spaced 2 on center.

Rotation is clockwise (looking from the motor to the pump /shaft face). Flow rates on the hi-low tandem pumps are 0.256 cu in/rev on the low flow and 0.793 cu in/rev on the high flow pump. This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Model GP-CBN is a HI/LO hydraulic gear pump with 12 different displacement combinations with maximum pressures of 900 psi for the low pressure pump and 3000 psi for the high pressure. The change from LO to HI pressure is automatic with the LO side pressure pre set from 400 psi to 900 psi.

The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. We also carry hydraulic cylinders and control valves for the most common log splitters on the market today.

We are supplier of log splitter OEM parts in the United States and Canada. We Stand behind all of our products for 6 months.

Return order must be in the same condition as received. We strive to provide the best possible service to our customers. If you are satisfied with our product and service, please leave us a.

Feedback as soon as you receive your order. Open a dispute or give us bad feedback. Please give us one chance resolve the problem. Thank you for looking and your valuable business. The item "19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm" is in sale since Friday, July 26, 2019.

This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Other Hydraulics & Pneumatics". The seller is "tool-tuff" and is located in Louisville, Colorado. This item can be shipped to United States.


19 GPM Hydraulic Log Splitter 2 Stage Gear Pump, Faster replacement for 16 gpm